Fluon® PTFE G

Fluon® PTFE Granular powders (G grade molding powders) are used for the production of sheets, rods, billets and other general moldings.
Filled PTFE compounds (FC) have improved creep and wear resistance. Please refer to the FC product page for more information.

Fluon® PTFE G Usage

Fluon® PTFE G Usage

The following are examples of uses for the G grade (molding powder).

Sheets, rod, billets, stock shapes

Sheets, rod, billets, stock shapes

Joints

Joints

Nozzles

Nozzles

Grade List

PropertiesBulk DensityMedian Particle SizePowder
Flow
Recommended
Molding Pressure
Tensile StrengthElongationDiametrical ShrinkageSurface FinishApplicationsCharacteristics
Test MethodsJIS K6891ASTM D4894ASTM D4894ASTM D4894ASTM D4894-
G16333025-16423504.2ExcellentLarge billets (300 - 1,500 mmH)
Sheet molding
Feed stock for Filled compounds
Fine particle powders,
High tensile strength,
Excellent surface finish,
Higher bulk density.
(G190 and G192)
G19044025-16423704.3Excellent
G19246025-16413604.7Excellent
G201630550Best-23
(JIS Kー7137)
250
(JIS Kー7138)
-GoodRam extrusion Pipe,Rod(<φ20mm)Presintered Polymer,
High powder flow,
Lower crystallinity
G307750650Best30363502.8GoodGeneral molding
Automatic molding
Isostatic molding
Ram extrusion Pipe,Rod(<φ20mm)
Agglomerated (Free-flowing) Powders,
The best powder flow (G307)
The highest bulk density (G355)
G350900380Better30363803Better

Inquiries about this Product

We also accept requests for samples, and consultations regarding introduction and verification support.